MWA Right Angle Gearheads HAD-060
Product model: HAD-060
Product data
Order number
HAD-060
Processing customized
Yes
Article number
MWA-HAD-060
Category
Right angle Gearheads
Gear type
Gear reducer
Installing form
Right angle
Layout forms
Tricyclic
Gear hardness
Hardened tooth surface
Application
Reducer
Brand
MWA
Type
MWA-HAD-060
The input speed
3000(rpm)
Characteristics

1. The servo motor is connected with the input shaft and locked by clamping clamp.

2. The input shaft is meshed with the gear plate; the gear plate is connected with the output shaft by screws, so as to realize power transmission.

3. The output shaft is fixed radially by two deep groove ball bearings, and the engagement clearance with the input shaft is adjusted axially by adjusting screws and lock nuts;

4. The face gear transmission device is used to realize high-precision power transmission, which includes a cylindrical gear and a face gear. This structure has assembly freedom in the axial direction, is less sensitive to assembly error, is easier to trim the tooth profile and adjust the backlash, and has higher contact rate.